What Is a Victron Recommended Software Integrator?
Victron Energy's Recommended Software Integrator (RSI) program recognizes a select group of companies worldwide that have demonstrated advanced expertise in programming, configuring, and customizing Victron power systems beyond standard installation. Unlike a typical dealer or installer credential, the RSI designation is reserved for integrators who work at the software and firmware level — building custom logic flows, writing Node-RED automations, interfacing with the VRM API, developing custom Venus OS interfaces, and programming complex dispatch and control strategies.
The program is global but small — there are approximately 50 recommended software integrators worldwide, with limited representation in the United States. This makes the credential meaningful for customers who need more than a basic equipment install and want to work with someone recognized by Victron for advanced integration capabilities.
At Alchemy Industrial, our systems integrator Paul Mutz holds the Victron Recommended Software Integrator designation — meaning your project is handled directly by someone Victron recognizes and recommends for advanced integration work.
Why This Matters for Your Project
Most Victron dealers can sell and install hardware. A Recommended Software Integrator can do that and much more — unlocking the full capability of Victron's ecosystem for projects that require custom behavior, third-party integration, or advanced monitoring:
- Custom Automation & Logic — Node-RED programming on Venus OS to create custom control flows — automated generator start/stop sequences, load shedding logic, time-of-use optimization, and conditional dispatch rules tailored to your facility.
- VRM API Integration — Connect your Victron system to existing fleet management platforms, SCADA systems, building management systems, or custom dashboards through the Victron Remote Management API.
- Advanced Monitoring & Dashboards — High-resolution Grafana dashboards with per-second time-series data across hundreds of Victron system parameters — far beyond what the standard VRM portal provides.
- Venus OS Customization — Custom interface development and low-level configuration on Victron's Venus OS for specialized applications in marine, industrial, and renewable energy environments.
- Automated Commissioning — Streamlined system setup and configuration that reduces commissioning time, eliminates manual errors, and ensures consistent deployments across multi-site projects.
- Third-Party Hardware Integration — Seamless connectivity between Victron components and non-Victron hardware — BMS units, energy meters, external sensors, PLCs, and proprietary industrial equipment.
Who Needs a Software Integrator
If your project goes beyond plug-and-play, a Recommended Software Integrator is the difference between a system that works and a system that works exactly the way you need it to:
- Commercial and industrial facilities with complex load management or dispatch requirements
- Multi-site deployments that need standardized, automated commissioning and remote monitoring
- Hybrid systems combining Victron with generators, solar, grid-tie inverters, or third-party BMS
- Projects requiring integration with SCADA, BMS, ERP, or custom fleet management platforms
- Marine and mobile applications with specialized power management needs
- Any Victron installation where the standard configuration tools are not sufficient
What We Deliver
System Design & Engineering
Complete Victron system design with component selection, wiring diagrams, and integration planning — optimized for your specific loads, site conditions, and operational requirements.
Custom Programming
Node-RED flows, VRM API integrations, and Venus OS customizations developed and tested for your exact use case. No generic configurations — every system is purpose-built.
Remote & On-Site Commissioning
Full system startup, configuration verification, and performance validation. We commission locally in Houston and remotely for projects nationwide.
Ongoing Monitoring & Support
VRM-based remote monitoring, proactive alerts, firmware management, and ongoing optimization. We stay involved after the system goes live.
Get Started
Whether you need custom programming for a new Victron installation or advanced integration on an existing system, reach out and tell us about your project:
- System overview or one-line diagram (if available)
- Victron components already purchased or specified
- Custom automation or integration requirements
- Third-party systems that need to connect (SCADA, BMS, fleet software, etc.)
- Timeline and project location
Frequently Asked Questions
A Victron dealer can sell equipment and perform standard installations. A Recommended Software Integrator has been vetted by Victron for advanced capabilities — custom Node-RED programming, VRM API integration, Venus OS development, and complex system automation. It's the difference between installing hardware and engineering the software that makes it perform exactly how your facility needs.
The program is global but small — there are approximately 50 recommended software integrators worldwide, with limited representation in the United States. Alchemy Industrial is one of them, operating out of Houston, TX.
If your system uses standard Victron configurations and doesn't require custom logic, third-party integration, or advanced monitoring, a qualified dealer or installer may be sufficient. However, if you need custom automation, API connectivity, fleet-wide monitoring, or integration with non-Victron systems like SCADA or BMS platforms, a software integrator is essential.
Yes. We regularly work on systems that were installed by other dealers or integrators. Whether you need custom programming added to an existing system, troubleshooting on a complex configuration, or integration with new third-party equipment, we can help.
Node-RED is an open-source visual programming tool that runs on Victron's Venus OS (the operating system inside GX devices like the Cerbo GX). It allows integrators to create custom logic flows — automated generator management, conditional load shedding, time-of-use dispatch, custom alerts, and data routing to external platforms. It's one of the most powerful tools in the Victron ecosystem and a core part of what we do.
Yes. While Houston is our home base, we support Victron software integration projects nationwide. VRM-based remote access, Node-RED development, API integration, and monitoring setup can all be handled remotely. For commissioning, we offer both on-site and remote options depending on project complexity.
It varies by scope, but a typical engagement includes a system review or design consultation, custom Node-RED programming or API development, remote or on-site commissioning, and ongoing monitoring and support. Simple projects like adding custom alerts or dashboard setup can be completed in days. Larger integrations involving fleet management or SCADA connectivity may take several weeks.
Yes. We are both an authorized Victron dealer and a Recommended Software Integrator. This means we can handle everything from equipment sourcing and system design through advanced programming and commissioning — all under one roof.